Jump to content

[QOS] Traffic Prioritization: Setting "DumaOS Classified Games" for only one device? Add device manually failed...


Recommended Posts

Greetings,

 

In short, is there a way to prioritize traffic using "DumaOS Classified Games" for only one or few specific devices (by name/MAC address)?

Afterall, it contains a nice list of common games; problem is that I do not want to prioritize devices from my tenants, so I want to cherry-pick my own devices.

I understand that I can use "Add Device" to add ports manually but I encountered an error in this scenario...

 

Specifically, I'm trying to prioritize traffic from the game Planetside 2, which needs

HTTP (TCP-80)
HTTPS (TCP-443)
UDP-20040 through UDP-20199    // for simplicity, just consider this line for now
UDP-5062
 

Following the guide: http://support.netduma.com/support/solutions/articles/16000061577-qos-bandwidth-speed-

I tried to Add Device > $DeviceName > Advance > Source (Start:1, End:65535), Destination (Start:20040, End:20199), UDP

and I got the following error...

Unable to install because streams overlap.

.

Any clue?

p.s. I disabled the default "DumaOS Classified Games" (for all device), and only have another rule set for a single device for "Simple: League of Legend".

 

Link to comment
Share on other sites

  • Administrators

Hi Jedi, welcome to the forum!

 

DumaOS Classified Games will prioritise any device it's detected as playing a game, there's no way to specify it for only a few devices.

 

If you're getting that message it means that the other rule you set has that range within it. If the games are on the same device you can make one range that covers them and that will work just fine.

Link to comment
Share on other sites

hmmm, I removed the LoL one and am able to add 20040-20199 afterward; however, Internet says LoL uses only...

 
League of Legends uses those ports:
5000 - 5500 UDP (League of Legends Game Client)
8393 - 8400 TCP (Patcher and Maestro)
2099 TCP (PVP.Net)
5223 TCP (PVP.Net)
5222 TCP (PVP.Net)
80 TCP (HTTP Connections)
443 TCP (HTTPS Connections)
8088 UDP and TCP (Spectator Mode)
 
not sure why they overlap, something's not right...
while typing this, I switched tab to try "With a simple QoS rule set for device X (e.g. LoL), try to add another rule for device X on another simple option / advanced port";
result is, you can have multiple simple QoS options set for one device but it would not work trying to add any advanced port (I tried a lot of random port number, like 45678).
 
Is this a bug? Should I file a bug report? Where to?
Also, how can I feature-request that "DumaOS Classified Games" be an option for only one or a few devices (not all devices in network including guest network)?
Link to comment
Share on other sites

  • Administrators

It might be that the service is classifying a wider range which would make sense. I'm not sure if we'll implement that feature but I've added it to our request list.

 

If you just have LoL selected for that device does Planetside 2 get prioritized?

Link to comment
Share on other sites

Hi Jedi, welcome to the forum!

 

DumaOS Classified Games will prioritise any device it's detected as playing a game, there's no way to specify it for only a few devices.

 

If you're getting that message it means that the other rule you set has that range within it. If the games are on the same device you can make one range that covers them and that will work just fine.

 

Fraser, am I reading this correctly, if I select my particular Xbox (one device) and then select games console it applies priorization for all devices that play games??? what If I just wanted one of my Xbox to be prioritised, how would i do that?  Would I just enter the ports manually or is there any easier way?

Link to comment
Share on other sites

  • Administrators

Fraser, am I reading this correctly, if I select my particular Xbox (one device) and then select games console it applies priorization for all devices that play games??? what If I just wanted one of my Xbox to be prioritised, how would i do that?  Would I just enter the ports manually or is there any easier way?

 

No only if DumaOS Classified Games is enabled will it prioritise for any device it detects is playing a game. If so just disable DumaOS Classified Games and add your Xbox with the Games Console service

Link to comment
Share on other sites

No only if DumaOS Classified Games is enabled will it prioritise for any device it detects is playing a game. If so just disable DumaOS Classified Games and add your Xbox with the Games Console service

 

I am unsure if I should do a new thread. I believe my problem is very similar. I have been having massive issues with FIFA 18 (Xbox One), again, after 2-3 weeks of decent gameplay (still laggy, but kind of responsive). I noticed the Traffic Prioritization doesn't work anymore. I did a factory reset. I tried adding only the device itself. I used the DumaOS classified games. Nothing gets prioritized. Any suggestions?

Link to comment
Share on other sites

  • Administrators

That’s odd. So when you are in a FIFA game against another player, the Red light for High Priority Traffic Detected does not come on?

 

Could you try factory resetting again and then leaving Traffic Prioritization in its default setting

 

Could you also make sure you have not enabled IPv6

 

Finally, do you use PPPoE? If yes, make sure your details are entered on the modem instead of the XR500

Link to comment
Share on other sites

That’s odd. So when you are in a FIFA game against another player, the Red light for High Priority Traffic Detected does not come on?

 

Could you try factory resetting again and then leaving Traffic Prioritization in its default setting

 

Could you also make sure you have not enabled IPv6

 

Finally, do you use PPPoE? If yes, make sure your details are entered on the modem instead of the XR500

 

Hi, thanks for replying. I did another factory reset and it works now. Before, it was showing me the prioritization packets for 1 min or so and then, nothing was prioritized. I will get back to you if this issue arises again.

Link to comment
Share on other sites

  • Administrators

Hi, thanks for replying. I did another factory reset and it works now. Before, it was showing me the prioritization packets for 1 min or so and then, nothing was prioritized. I will get back to you if this issue arises again.

 

Great, thanks MihaiL. Hopefully the issue is solved permanently now  :)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...