Jump to content

Recommended Posts

hi  had some password confusion , i cannot access interface , and pinhole reset is not working , no response at all i mean when pressed in ?  

anyone have a clue .

people seem to mention button on front which i don't have only pinhole at rear . 

thanks .

Link to comment
Share on other sites

hi  had some password confusion , i cannot access interface , and pinhole reset is not working , no response at all i mean when pressed in ?  

anyone have a clue .

people seem to mention button on front which i don't have only pinhole at rear . 

thanks .

Press the reset hole for at least 25 to 30 seconds until I hear a beep then the factory Duma will have reset correctly.

Link to comment
Share on other sites

i did t thanks  for that  nothing  i preset it for hole minute lots of time s   nada.

 

As per my post in the other thread: 

 

If you mean your admin password, you will need to factory reset using the pinhole. Follow the instructions for 'Factory Reset via Hardware' here

 

Make sure the lights on the Netduma R1 flash off and then back on again. You will then know that you have pushed the reset button down

Link to comment
Share on other sites

hi yes i have done all this yes admin password  log in to 192.168.88.1  is the one  i have lost and yes,  i do know that only hard reset is option

i reiterate the point that if i press the button in  the online and only  hole  in the  r1router  the reset button,   i  get no response !

i really don't need to make a movie about this  please .. cmon..

Link to comment
Share on other sites

  • 2 weeks later...

Hi when I take power lead out n in it bleebs. Yes “But when I press. Reset pinhole nothing lights don’t go out no bleeb

I’m posting again on this issue because I’m locked out again as my pc is down for few days ?

cannot seem to access gui with “wireless “ iPad or PS4 wwweb page wired to router r1 192.168.88.1/ which is not usually problem

So tried resetting hard. Button no beeb so don’t know it worked ? wireless still working PS4 still routed through.R1 have www

But can’t sine in to gui Netduma not clear what password & username are I’ve tried mine and Netdumar1

“by the wAy what would username be arfter reset. If password is netdumar1 ?

Got a feeling I will have to have pc working when it is I can type duma ip and get straight on gui no prob

Link to comment
Share on other sites

  • Administrators

Yes password is 'netdumar1' after reset.

 

Disable WiFi & Apply. Then reboot from miscellaneous settings. Then enable WiFi & Apply. Do you have any WiFi issues after that?

 

Hardware reset doesn't work on mine, too.
No response by pressing the button.

 

Are you holding it for at least 20seconds?

Link to comment
Share on other sites

Yes password is 'netdumar1' after reset.

 

Disable WiFi & Apply. Then reboot from miscellaneous settings. Then enable WiFi & Apply. Do you have any WiFi issues after that?

 

 

 

Are you holding it for at least 20seconds?

Yes, several times. I feel the click of the button but nothing happens at all. I tried it while powering on and after starting up, just no response.
Link to comment
Share on other sites

 

What if we cannot access miscellaneous gui I have pressed reset pinhole and still do not get reset. On login

So can’t log in to 192.168.88.1 without turning WiFi of which I can’t access because no LAN access at present

Would it be true to say if a reset has taken place I wouldn’t get the 192.168.88.1 login box on my device (iPad)

As my known username password not working .

Link to comment
Share on other sites

  • Netduma Staff

Yes, several times. I feel the click of the button but nothing happens at all. I tried it while powering on and after starting up, just no response.

 

Can you access the interface / Internet? If so, could you factory reset via Settings > Miscellaneous rather than using the pin button?

 

What if we cannot access miscellaneous gui I have pressed reset pinhole and still do not get reset. On login

So can’t log in to 192.168.88.1 without turning WiFi of which I can’t access because no LAN access at present

Would it be true to say if a reset has taken place I wouldn’t get the 192.168.88.1 login box on my device (iPad)

As my known username password not working .

 

Could you please take a look at this guide and follow the instructions found there: http://support.netduma.com/support/solutions/articles/16000022375-i-unticked-preserve-settings-when-upgrading-can-t-access-my-router-help

Link to comment
Share on other sites

  • Netduma Staff

I can access the gui and do the reset there. But the hardware button doesn't work. I'm out of warranty time and found it out last week when I had issues and was adviced to do a hardware reset.

 

Ah okay. The factory reset from miscellaneous settings should be just as effective; is your router functional then? Are there any issues that you believe need to be fixed via a hardware reset?

Link to comment
Share on other sites

Jack hi I cannot rest pinhole , I have followed link disconnecting hub, port 2 on r1 to web and 192.168.88.1/ only gives me the password box for interface I have tried my passwords for this and not working

If the pinhole was able to reset I would be able to gain access. Any other methods I have isp changeover Thursday from cable to Vdsl

So need router up n running ideally .

Thanks. Seemed to be convo hijacked still with problem of no interface .

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...