Jump to content

Streaming from Pc to Youtube and gaming on Ps4 at the same time.


Recommended Posts

hey guys

 

love The R1!!

 

I'm needing help!! as i'm having problems when i start streaming my Ps4 gameplay through the Pc via the Elgato hd60s which records PS4/ xbox. my problem is when start streaming i can not get a good connection as my bullets are rubber banding. not registering. and is frustrating. but when i dont live stream i get awesome connection? 

i have done multiple tests on dslreports and my ping is 12ms with a 2 ms buffer and get A+ across board.

but that's not whilst i'm gaming as it would kick me out of the game.  

my sliders are set at 70% down and 90% as my ISP is BT braodband and get 76 down and 20 up.

 

hyper traffic is turned on.

 

could you please help. 

 

kind regards John M.

Link to comment
Share on other sites

hey guys

 

love The R1!!

 

I'm needing help!! as i'm having problems when i start streaming my Ps4 gameplay through the Pc via the Elgato hd60s which records PS4/ xbox. my problem is when start streaming i can not get a good connection as my bullets are rubber banding. not registering. and is frustrating. but when i dont live stream i get awesome connection? 

i have done multiple tests on dslreports and my ping is 12ms with a 2 ms buffer and get A+ across board.

but that's not whilst i'm gaming as it would kick me out of the game.  

my sliders are set at 70% down and 90% as my ISP is BT braodband and get 76 down and 20 up.

 

hyper traffic is turned on.

 

could you please help. 

 

kind regards John M.

 

I'd assume you need to mess with the congestion control to try and get it spot on. Mine's always on 70/70 but I don't stream so maybe someone else who does can help you better.

Link to comment
Share on other sites

port forwarding is on as WW2 says uses port 3074 so i have got a open nat type. so im really stuck :-/ cant be my internet connection as the exchange is 300 metres away from my house. 

Link to comment
Share on other sites

  • Netduma Staff

port forwarding is on as WW2 says uses port 3074 so i have got a open nat type. so im really stuck :-/ cant be my internet connection as the exchange is 300 metres away from my house. 

 

Hi, welcome to the forum! Device Prioritisation is useful for streaming and gaming at the same time. Set your PC and console to a higher percentage on Device Prio and turn on Share Excess. (Make sure to set this up for Upload as well).

 

It sounds like all your other stats are fantastic. What happens when your in-game ping when you're streaming? It might be worth running a PingPlotter test whilst you're streaming to see how much your ping is affected.

Link to comment
Share on other sites

Assuming your bandwidth doesn't fluctuate much (I know mine doesn't on BT Infinity) I'd suggest dropping the upload slider to match the download at 70%, then use device prio as suggested above to prioritise the PC. I'd assume you're probably streaming at 720p60 max since that's basically standard for the best YouTube streams, so I'd recommend 50% prio for the PC for both upload and download. Gaming on PS4 rarely uses more than 500Kb, if that, so you wouldn't need to increase the bandwidth the PS4 gets. Just go 70% both ways on the sliders, 50% for both tabs on the PC and then leave share excess on.

 

If you want to guarantee your PC gets enough bandwidth (especially if you're on 1080p), start up a stream and then check the bandwidth monitor. Then load up a CoD of your choice, click show dormant hosts on the geofilter, connect to online services, click the UK server dot and ping it to see if it gives you almost as much stability as you see when not streaming.

 

I'd suggest killing two birds with one stone by testing this on IW. You can check your ping to the UK server and then start a game and see if streaming gives you hexagon symbols. Not sure why they removed those game health icons after the WW2 beta because I know for a fact there are as many skipping packet dropping terminators on WW2 as there are in IW...

Link to comment
Share on other sites

hey guys

 

love The

 

I'm needing help!! as i'm having problems when i start streaming my Ps4 gameplay through the Pc via the Elgato hd60s which records PS4/ xbox. my problem is when start streaming i can not get a good connection as my bullets are rubber banding. not registering. and is frustrating. but when i dont live stream i get awesome connection?

i have done multiple tests on dslreports and my ping is 12ms with a 2 ms buffer and get A+ across board.

but that's not whilst i'm gaming as it would kick me out of the game.

my sliders are set at 70% down and 90% as my ISP is BT braodband and get 76 down and 20 up.

 

hyper traffic is turned on.

 

could you please help.

 

kind regards John M.

disable hyper traffic for ww2
Link to comment
Share on other sites

IIRL I will give that a go as I’ve just ended my stream was a lot better but in some gun fights I was still loosing to smgs from distance even tho I had the new heroic goat 2. I will streaming from 130pm tomorrow GB time and I stream at 1080 60fps.

 

Kind regards John

Link to comment
Share on other sites

IIRL I will give that a go as I’ve just ended my stream was a lot better but in some gun fights I was still loosing to smgs from distance even tho I had the new heroic goat 2. I will streaming from 130pm tomorrow GB time and I stream at 1080 60fps.

 

Kind regards John

Good luck. I haven't even tried streaming and WW2 was so busted and laggy on 7ms ping to the UK that I uninstalled and haven't touched it since November. Everyone stutters, enemies deal damage spikes where three shots hit you at once, and my bullets just go through their chests lmfao

 

I think I saw one of your streams briefly once because I recognise your name. Did you do a Netduma setup vid? I think I went from that to an IW stream and saw you had hexagons, but I swear you were on Virgin Media? I thought "typical VM cable, pile of shite"

Link to comment
Share on other sites

  • Netduma Staff

Put the 'Interval' on 2.5 instead as there is a bug with PingPlotter with lower intervals showing packet loss.

 

Also, pay more attention to the graph at the bottom. If there are no red bars on that we're golden. If you could get a screenshot instead or a clearer picture that'd be awesome :D

Link to comment
Share on other sites

hi jack 

 

the picture i have will not upload as it says file is to large :-/ plus i have now ordered new ethernet cables 0.5m long which come tomorrow hopefully it will sort out the packet loss to the R1??

 

current setup is wall socket to netgear D7000 then R1 - PC,PS4 and Ps3 is connected. all hard wired in. so all ethernets are getting replaced. ;-) and if using ping plotter what server am i pinging? if i game on PS4? as the duma doesnt show me the I.P address of the main server. 

 

kind regards john 

Link to comment
Share on other sites

  • Netduma Staff

Ethernet cables are a likely culprit so this could well fix the issue. Please let us know how it goes :)

 

You'll want to ping Twitter.com or a local news site using PingPlotter. Do this when you're not gaming / downloading for a clear indication of your line.

Link to comment
Share on other sites

That's just a graphical error mate. Setting interval to 0.5s or sometimes 1s shows packet loss on the first hop that isn't really there. Try a 2.5s interval plot to confirm. Otherwise all looks good

Link to comment
Share on other sites

  • 2 weeks later...

hi guys. 

 

i having major problems still. when i am streaming like last Saturday  every gun fight i got into on WW2 PS4 i lost. even though the enemy wasn't looking at me and my bullets was going through them. so i decided to disconnect the R1 and then i had awesome game play. twice i died 1 off the V2 rocket. bullet detection was on point.  is there a way i can reinstall the firmware on the R1? as i have only 4 devices connect which is Ps4 Pro Iphone. sky and Pc, as i live on my own no one else is using the internet. i have reactive on at 75% down and up on the CC dsl reports is saying have 11ms with a 1ms jitter? could i be overthrottling the R1 i just dont know anymore ;-/ i have tried simjc advice on the ultimate guide but still having problems. can someone please help. 

 

kind regards john mortiss 

Link to comment
Share on other sites

  • Netduma Staff

hi guys. 

 

i having major problems still. when i am streaming like last Saturday  every gun fight i got into on WW2 PS4 i lost. even though the enemy wasn't looking at me and my bullets was going through them. so i decided to disconnect the R1 and then i had awesome game play. twice i died 1 off the V2 rocket. bullet detection was on point.  is there a way i can reinstall the firmware on the R1? as i have only 4 devices connect which is Ps4 Pro Iphone. sky and Pc, as i live on my own no one else is using the internet. i have reactive on at 75% down and up on the CC dsl reports is saying have 11ms with a 1ms jitter? could i be overthrottling the R1 i just dont know anymore ;-/ i have tried simjc advice on the ultimate guide but still having problems. can someone please help. 

 

kind regards john mortiss 

 

Is this still while streaming, or is this all the time now? Do you have an open NAT, and have you tried all the steps suggested above? Did you change any settings or put your device back in Hyper Traffic since you last replied?

Link to comment
Share on other sites

hi jack this is whilst i'm streaming. NAT type is open and yes i have it worked and now if awful i went back on infinite warfare and had yellow dots on the screen. i had to stop my stream due to it.  then i went onto WW2 and i restarted the stream and same problem ;-/ so now i am just using my netgear d7000 dsl router/modem with QOS turned on. 

Link to comment
Share on other sites

hey guys.

 

just an update. i reinstalled the software to 1.03.6g

 

i did a private stream outputting at 720P 60fps with all my applications open (obs/ you tube/ twitch/ re-stream/ streamlabs and spotify) the CC was on 100% then i did a DSL report and then changed the CC to get my best values and this is my settings for BT infinity 75 download and 20 upload with a base ping of 11ms: 

 

changed the reactive algorithm to preemptive. With the CC set at 50% download and upload at 60% share excess on and all devices have the same values in the prioritisation. strict mode on with a ping assist of 30ms and a radius of 1099km . misc settings are everything turned off except  Upnp and cookies. and i dont use hyper traffic. youtube video at https://www.youtube.com/watch?v=SiHq73lYbd4  watch from 2:23:36 

 

thanks guys john 

Link to comment
Share on other sites

  • Netduma Staff

That seems like a great stream John, looks like you're all set up. Are you still having issues after reinstalling the firmware?

 

It doesn't seem that you are from that stream, so I'm really glad if that did solve your problem. I'll keep that solution in mind for anyone else with your issue :D

Link to comment
Share on other sites

no issues at all now jack after the reinstall. the bullets was connecting and the connection felt crispy! thankyou for the help tho. your software is amazing and when i upgrade to the xr500 on the 1st of march will the XR500 keep my settings from the R1?

 

kind regards john 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...