Jump to content

Getting Uncaught error messages? Here's the solution!


Recommended Posts

  • Administrators

If you're getting error messages like these:

Uncaught ReferenceError: Chart is not defined
Uncaught TypeError: c.draggable is not a function  
Uncaught ReferenceError: d3 is not defined
Uncaught TypeError: tree.invalidateData is not a function
Uncaught ReferenceError: topojson is not defined
Uncaught TypeError: Cannot read property 'addWidget' of undefined

Then it is highly likely you have the Bitdefender Anti-Virus/Firewall or another Anti-Virus/Firewall. This guide is specific to Bitdefender at the moment. You need to whitelist the router interface in order to prevent these errors from occurring. Please follow the instructions below:

 

This will allow you to continue to use Bitdefender and access the router interface. If you have a different firewall please let us know so we can contact their support (and it would be great if you can contact their support too). 

 

Do the following steps for http://routerlogin.net and http://192.168.1.1

 

To add a website to the Whitelist:

  1. Click the B icon on the left sidebar of the Bitdefender interface.
  2. Click the VIEW FEATURES link.
  3. In the WEB PROTECTION pane, click Whitelist.
  4. Provide the address of the blocked website or online application in the corresponding field and click Add.
  5. Click Save to save the changes and close the window.

Only websites and applications that you fully trust should be added to this list.These will be excluded from scanning by the following engines: malware, phishing and fraud.

 

Once you have done the above you will need to reboot your PC, then access the interface and do a refresh without caching, please see this guide for your particular browser on how to do that: https://en.wikipedia.org/wiki/Wikipedia:Bypass_your_cache#Bypassing_cache

 

If after putting through the exceptions you're still encountering the issue disable Bitdefender fully by following this guide: https://www.bitdefender.com/consumer/support/answer/3347/

 

The Bitdefender update is out so you should not longer get this issue with Bitdefender enabled.

Link to comment
Share on other sites

Didn't work for me. I also tried the Stealth Mode settings in a different thread. I whitelisted, cleared cache, tried with Chrome, Edge, and IE. All give differing errors. I'm not able to use the GeoFilter section at all and the Dashboard gives errors on Edge. Right now I'm barely able to configure the router.

Link to comment
Share on other sites

  • Administrators

We reproduced the issue today and gave the necessary information to the Bitdefender team so should have a proper fix soon. Please try disabling it fully by following this, do you still get the same issue? https://www.bitdefender.com/consumer/support/answer/3347/

 

I found it very hard on their software as there as so many different options that it's likely it still needs to be whitelisted elsewhere on the software, I'll be able to check this tomorrow.

Link to comment
Share on other sites

We reproduced the issue today and gave the necessary information to the Bitdefender team so should have a proper fix soon. Please try disabling it fully by following this, do you still get the same issue? https://www.bitdefender.com/consumer/support/answer/3347/

 

I found it very hard on their software as there as so many different options that it's likely it still needs to be whitelisted elsewhere on the software, I'll be able to check this tomorrow.

 

Cool. Thanks for all your help.

Link to comment
Share on other sites

  • Administrators

Good news: Had a Bitdefender developer take a look at my PC while the issue was occurring with Bitdefender enabled. They said at the time that they think they know what is causing the issue & how to fix it so with any luck we'll see a fix soon, either in the form of a patch on their software or a hotfix for the router.

Link to comment
Share on other sites

  • Administrators

Any news yet?  The situation has gotten worse.  I did the whitelist but that didn't work.  Running the Bitdefender total security on my laptop but the router is connected through the Box2.  Should I contact Bitdefender directly too?

 

I let them know later last week so not sure how much time they would have spent so far on a fix. There is no need for you to contact them as they are already aware and working on the fix, I provided them with all the debug information they needed. I will chase them for an update.

 

I'd suggest disabling it for now if it's really becoming an issue: https://www.bitdefender.com/consumer/support/answer/3347/

Link to comment
Share on other sites

  • Administrators

Any news yet?  The situation has gotten worse.  I did the whitelist but that didn't work.  Running the Bitdefender total security on my laptop but the router is connected through the Box2.  Should I contact Bitdefender directly too?

I let them know later last week so not sure how much time they would have spent so far on a fix. There is no need for you to contact them as they are already aware and working on the fix, I provided them with all the debug information they needed. I will chase them for an update.

 

I'd suggest disabling it for now if it's really becoming an issue: https://www.bitdefender.com/consumer/support/answer/3347/

 

As a follow up Bitdefender has said the fix should be out this week. 

Link to comment
Share on other sites

We're just testing Bitdefenders fix, assuming it works they'll put out an update.

 

Any idea if this was ever released by BD? I'm still seeing.

 

"Uncaught TypeError: tree.invalidateData is not a function" - Device Manager

"Uncaught ReferenceError: d3 is not defined" - QoS

"Uncaught ReferenceError: d3 is not defined" - Geofilter

 

I can't use any of the above features as their UI doesn't load.

Link to comment
Share on other sites

  • Administrators

Any idea if this was ever released by BD? I'm still seeing.

 

"Uncaught TypeError: tree.invalidateData is not a function" - Device Manager

"Uncaught ReferenceError: d3 is not defined" - QoS

"Uncaught ReferenceError: d3 is not defined" - Geofilter

 

I can't use any of the above features as their UI doesn't load.

 

Hi Peanut, I just had some correspondence with them today. On Friday I tested the fix and it didn't seem to work, however upon testing it today I can confirm it did work and stopped the errors on the interface. As such I suspect they will push out an update imminently. I will let you know as soon as I have confirmation that they've done so.

Link to comment
Share on other sites

Hi Peanut, I just had some correspondence with them today. On Friday I tested the fix and it didn't seem to work, however upon testing it today I can confirm it did work and stopped the errors on the interface. As such I suspect they will push out an update imminently. I will let you know as soon as I have confirmation that they've done so.

 

Thank you so much for the update and the quick response on this issue.

Link to comment
Share on other sites

  • 1 month later...
  • 3 years later...

I know this is older but I am having the "uncaught reference error d3 is not defined" every time I try to open the QOS tab?  I am not using Bitdefender and cant figure out the issue..?  thank you for any and all help in advance <3

Link to comment
Share on other sites

also I cant view or change my QOS pie chart or even see it because of the previously mentions error. and I get other errors when trying to view other tabs like device manager, and I get the error ' unexpected error" when trying to view the hybrid vpn tab, even though I dont use the vpn section I just went through the tabs to see if anything was working and basically other than the dashboard and network settings nothing else is working, well I cant see any of it because it wont load up and just gives me the two errors I mentions. (reference error d3 not defined) and error (unexpected error)  those are the two error issues im having so i cant veiwe anything to be able to adjust things like QOS...?? thanks in advance again :)

Link to comment
Share on other sites

  • Administrators
43 minutes ago, bernhard said:

I know this is older but I am having the "uncaught reference error d3 is not defined" every time I try to open the QOS tab?  I am not using Bitdefender and cant figure out the issue..?  thank you for any and all help in advance ❤️

What firmware version are you on currently? When did it first start to appear? Do you have an Adblocker on your web browser or an Anti-Virus on the PC?

Link to comment
Share on other sites

I am on version 

Firmware version R1 2.1.3.29

and I turned my adblocker off fully to see if it helped but it was working up until about a week or two at most, and I've had the adblocker for a good couple years and the only antivirus I have is the windows defender nothing else :)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...