Jump to content

Netduma and DGL-5500.


Recommended Posts

Yes. Just connect the R1 (WAN) to DGL (LAN).  The R1 will detect that it is not connected to a modem but another router.  The DGL will issue a ip address to the R1.  Place the ip address into the DGL's dmz. This will prevent you from having any NAT issues.  

Link to comment
Share on other sites

Yes. Just connect the R1 (WAN) to DGL (LAN).  The R1 will detect that it is not connected to a modem but another router.  The DGL will issue a ip address to the R1.  Place the ip address into the DGL's dmz. This will prevent you from having any NAT issues.  

It won't let me.

post-7131-0-65541000-1516053432_thumb.png

Link to comment
Share on other sites

Leave the connections as I stated above then see if you can connect (wired) desktop/laptop to the R1(LAN) and then access the R1 by way of 192.168.88.1?

 

Make sure you have the DGL (LAN) connected to the R1 (WAN/POE port).

Link to comment
Share on other sites

Leave the connections as I stated above then see if you can connect (wired) desktop/laptop to the R1(LAN) and then access the R1 by way of 192.168.88.1?

 

Make sure you have the DGL (LAN) connected to the R1 (WAN/POE port).

It's working now I forgot to connect my ethernet cable from my desktop back to Netduma's LAN port, now I can access both routers. One more question my PS4 should be connected to Netduma to use the Host Filtering only right? as the DGL is handling my speeds and wifi.

Link to comment
Share on other sites

WAN IP.

You should'nt have to setup a static ip. With DHCP on on the DGL, it should see your router as another device and give it it's own ip address.  You can see this something like this on the device manager page.  Basically everything connected to the DGL will get it's own ip address from the DGL (192.168.0.x) including the R1 and everything connected to the R1 with get it's own address from the R1 (192.168.88.x). Hope this makes sense. And yes what ever device you want to use the geofilter will NEED to be connected to the R1. If you can't get it to work then your way of doing with the static ip address work too. There is always more than one way to skin a cat, ruff ruff.

 

flVKRSj.png

Link to comment
Share on other sites

You should'nt have to setup a static ip. With DHCP on on the DGL, it should see your router as another device and give it it's own ip address.  You can see this something like this on the device manager page.  Basically everything connected to the DGL will get it's own ip address from the DGL (192.168.0.x) including the R1 and everything connected to the R1 with get it's own address from the R1 (192.168.88.x). Hope this makes sense. And yes what ever device you want to use the geofilter will NEED to be connected to the R1. If you can't get it to work then your way of doing with the static ip address work too. There is always more than one way to skin a cat, ruff ruff.

 

flVKRSj.png

I should input whatever IP address I'm getting from Netduma's device manager to the DGL correct? in this case 192.168.1.111.

post-7131-0-76138200-1516068146_thumb.png

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...