Jump to content

Moderate NAT


Recommended Posts

Hi Guy's

 

I'm getting Moderate NAT on the Xbox One, I was connected to my ISP Hub and was getting the same results so I fort I'll try the BT modem but still getting the  same effect.

 

What can I do?

 

I have UpNp turned on.

 

Thanks :)

Link to comment
Share on other sites

I've already checked all the support pages with no avail unfortunately, I see other people are facing the same Issue so I'm guessing it's a firmware Issue ?

Its not a firmware issue. getting an open NAT is perfectly possible. I have 4 xbox ones in my house all with open NATs.

 

Ill do my best to help you, I'm not sure what steps you've already tried so Ill just make some suggestions to begin with.

 

Firstly: make sure the geo-filter is disabled as having it enabled while checking your NAT type can cause the Xbox to falsely report a Moderate NAT. Also make sure that upnp forwarding in miscellaneous is disabled and you have no rules set up in port forwarding.

 

Is your BT modem the (white) Openreach one or the (black) BT Homehub? If its the BT Homehub then you need to put the Netdumas WAN IP from the device manager page into the BT Homehub's DMZ.

post-155-0-49425300-1512745085_thumb.jpg

post-155-0-79232800-1512745097_thumb.jpg

Link to comment
Share on other sites

  • Netduma Staff

I've already checked all the support pages with no avail unfortunately, I see other people are facing the same Issue so I'm guessing it's a firmware Issue ?

 

Hi, welcome to the forum! The advice above is spot on, I'd highly recommend doing everything PollutionBlues suggested.

Link to comment
Share on other sites

Thank you for the Information Guy's, I'm currently using the BTOR Modem - Netduma < All device's connected to the Duma, I Believe Its the Geo-Filter what's the cause then? As i'm not behind a double NAT.

Link to comment
Share on other sites

Thank you for the Information Guy's, I'm currently using the BTOR Modem - Netduma < All device's connected to the Duma, I Believe Its the Geo-Filter what's the cause then? As i'm not behind a double NAT.

If you disable the geo-filter by unticking the ‘enable’ box do you get an open NAT? You may have to reboot your console.

 

Regarding your post about the slow GUI in another post, check you don’t have UPnP and portforwarding both enabled and also see this link.

 

http://forum.netduma.com/topic/19266-slow-gui-interface-the-solution-is-here/

Link to comment
Share on other sites

If you disable the geo-filter by unticking the ‘enable’ box do you get an open NAT? You may have to reboot your console.

 

Regarding your post about the slow GUI in another post, check you don’t have UPnP and portforwarding both enabled and also see this link.

 

http://forum.netduma.com/topic/19266-slow-gui-interface-the-solution-is-here/

 

That did the trick, It's a Little bit more hassle to keep turning it on and off tho  :rolleyes:  Would be great if the guy's could fix this is the future, Fingers crossed  :D

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...