Jump to content

Trying to use the NetDuma again


Recommended Posts

so I'm taking out the NetDuma from retirement, but i'm running into problems again. i hooked up the netduma to my modem/router from my isp. i put the netduma in the DMZ, but i'm still getting xbox one saying i'm strict, and UPnP not successful... what am i doing wrong?

 

now it's saying NAT type: Unavailable and underneath (all on xbox one) saying xbox,com/xboxone/Teredo

 

if anyone can help me out with even getting the netduma to connect the xbox one to the internet i would greatly appreciate it.

Link to comment
Share on other sites

  • Administrators

Did you put the correct IP in the DMZ? The WAN IP from the R1 device manager? 

 

Disable UPnP & port forwarding on the ISP router.

Disable upnp forwarding in R1 miscellaneous settings

Only use UPnP or port forwarding on the R1 not both

Then do above

Link to comment
Share on other sites

Did you put the correct IP in the DMZ? The WAN IP from the R1 device manager? 

 

Disable UPnP & port forwarding on the ISP router.

Disable upnp forwarding in R1 miscellaneous settings

Only use UPnP or port forwarding on the R1 not both

Then do above

 

so after last night (before the replies) i just factory restarted my netduma.  i figured i would start from scratch.  the xbox is now saying the following  

 

Current Network Status

 

Wired

 

IPv4 & IPv6

 

Nat Type:  Strict

 

Double NAT Detected

 

xbox.com/xboxone/DoubleNat

 

All services are available 

 

the device manager in netduma is still showing it's detected another router, but the WAN ip address i tried putting in the DMZ, but not sure if it's working properly with my ISP router.  i'll probably have to call and see if it is or not.  once i put the netduma in the DMZ this should work, correct?  i also disabled geo filter, and disabled upnp forwarding in settings--> mis

Link to comment
Share on other sites

  • Netduma Staff

so after last night (before the replies) i just factory restarted my netduma.  i figured i would start from scratch.  the xbox is now saying the following  

 

Current Network Status

 

Wired

 

IPv4 & IPv6

 

Nat Type:  Strict

 

Double NAT Detected

 

xbox.com/xboxone/DoubleNat

 

All services are available 

 

the device manager in netduma is still showing it's detected another router, but the WAN ip address i tried putting in the DMZ, but not sure if it's working properly with my ISP router.  i'll probably have to call and see if it is or not.  once i put the netduma in the DMZ this should work, correct?  i also disabled geo filter, and disabled upnp forwarding in settings--> mis

 

If you put the WAN IP into the DMZ section on the modem, you should technically not have this error as the double NAT would, at that point, be solved. If it is still stating that you have a strict NAT, make sure you're connected via Ethernet on the Xbox and remove the Netduma from your setup completely. Do you still get a strict NAT even without the Netduma connected?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...