2 Xbox One's showing Open NAT in Infinite Warfare

[jayStepp]

Hey guys, first post.

I have been trying to figure out how to get both of my Xbox One's to show Open in IW/MWR while on at the same time. I just wanted to share how I was able to finally achieve it.

 

First my setup:

Wall > NetgearCM500 > Netduma

 

Everything is hardwired in. I enabled UPnP in both Settings > Misc and Settings > UPnP.

I also assigned a static IP for both Xbox Ones. I then Port Forwarded ports 3075 tcp/udp and port 3076 tcp/udp to my second Xbox. Rebooted all equipment and both now show Open in game on both Xboxs in IW and MWR.

 

Thanks for reading and I hope it can help

[Buster]

Welcome to the forum,

Out of curiosity is Ipv6 enabled in LAN, WAN and misc by any chance?

[Netduma Jack]

Hey guys, first post.

I have been trying to figure out how to get both of my Xbox One's to show Open in IW/MWR while on at the same time. I just wanted to share how I was able to finally achieve it.

 

First my setup:

Wall > NetgearCM500 > Netduma

 

Everything is hardwired in. I enabled UPnP in both Settings > Misc and Settings > UPnP.

I also assigned a static IP for both Xbox Ones. I then Port Forwarded ports 3075 tcp/udp and port 3076 tcp/udp to my second Xbox. Rebooted all equipment and both now show Open in game on both Xboxs in IW and MWR.

 

Thanks for reading and I hope it can help

 

Hey Jay, welcome to the forum! Thanks for posting your solution, I'll make note of how you fixed it and see if it helps anyone else.

 

Let us know if you encounter any issues

[e38BimmerFN]

What is your ISP modem Mfr and model #?

 

Try this,

Set Automatic IP addressing on both game consoles, then log out of the account then turn OFF the xbox. Set uPnP enabled on the router and don't do any Port Fowarding configurations. Set a reserved IP address ON the router for each xbox.

 

Turn on 1 xbox. Look at the dash board network settings. Is the NAT status OPEN here? If so, turn on the next xbox console and check the NAT staus under dash board network settings. OPEN NAT?

Don't check NAT in game. Most important is Dash board NAT status under network settings.

 

What is your ISP modem Mfr and model #?

 

FYI: http://forum.netduma.com/topic/20578-two-xbox-ones-on-the-same-netduma-issues/?do=findComment&comment=143744

 

Hey guys, first post.

I have been trying to figure out how to get both of my Xbox One's to show Open in IW/MWR while on at the same time. I just wanted to share how I was able to finally achieve it.

 

First my setup:

Wall > NetgearCM500 > Netduma

 

Everything is hardwired in. I enabled UPnP in both Settings > Misc and Settings > UPnP.

I also assigned a static IP for both Xbox Ones. I then Port Forwarded ports 3075 tcp/udp and port 3076 tcp/udp to my second Xbox. Rebooted all equipment and both now show Open in game on both Xboxs in IW and MWR.

 

Thanks for reading and I hope it can help

[Netduma Fraser]

Welcome to the forum & thanks for sharing your solution!